DynamoVisualProgramming.ZeroTouchLibrary by Autodesk

<PackageReference Include="DynamoVisualProgramming.ZeroTouchLibrary" Version="3.0.1.7382" />

---

API Diff between 3.0.1.7382 and 4.0.2.3866

251 Additions 52 Removals

Autodesk.DesignScript.Geometry

• public class BoundingBox : DesignScriptEntity
  • public static BoundingBox ByGeometry(Geometry geom)
• public class Curve : Geometry
  • public CoordinateSystem CoordinateSystemAtDistance(double segmentLength = 0)
  • public double DistanceAtParameter(double param = 0)
  • public Curve[] DivideByDistance(int divisions = 10)
  • public Curve[] DivideByDistanceFromParameter(double distance = 1, double parameter = 0)
  • public Curve[] DivideByLengthFromParameter(double length = 1, double parameter = 0)
  • public Curve[] DivideEqually(int divisions = 10)
  • public PolyCurve Join(Curve curve)
  • public double LengthBetweenParameters(double startParam = 0, double endParam = 1)
  • public double ParameterAtDistance(double segmentLength = 0)
  • public Curve[] ParameterSplit(double parameter = 0.5)
  • public Curve[] ParameterSplit(double[] parameters)
  • public Curve ParameterTrim(double startParameter = 0, double endParameter = 1)
  • public Curve ParameterTrimEnd(double endParameter = 1)
  • public Curve[] ParameterTrimInterior(double startParameter = 0, double endParameter = 1)
  • public Curve[] ParameterTrimSegments(double[] parameters)
  • public Curve ParameterTrimStart(double startParameter = 0)
  • public Plane PlaneAtDistance(double segmentLength = 0)
  • public Point PointAtDistance(double segmentLength = 0)
  • public Curve[] SplitByParameter(double parameter = 0.5)
• public abstract class DesignScriptEntity : IDisposable, IGraphicItem, IInstanceableGraphicItem
  • public EntityTags Tags
  • public EntityTags Tags { get; }
  • protected virtual void DisposeDisplayable()
• public class EllipseArc : Curve
  • public static EllipseArc ByPlaneRadiiStartAngleSweepAngle(Plane plane, double xRadius = 1, double yRadius = 1, double startAngle = 0, double sweepAngle = 180)
• public abstract class Geometry : DesignScriptEntity
  • public string ExportToSAT(string filePath)
  • public string ExportToSAT(string filePath, double unitsMM)
  • public byte[] SerializeAsSAB()
• public class Mesh : DesignScriptEntity
  • public double Area { get; }
  • public int EdgeCount { get; }
  • public IEnumerable<double> EdgesAsSixNumbers { get; }
  • public int TriangleCount { get; }
  • public IEnumerable<double> TrianglesAsNineNumbers { get; }
  • public int VertexCount { get; }
  • public IEnumerable<double> VerticesAsThreeNumbers { get; }
  • public double Volume { get; }
  • public static Mesh ByGeometry(Geometry inputGeometry, double tolerance = -1, int maxGridLines = 512)
  • public static Mesh ByPointsIndexGroups(IEnumerable<Point> points, IEnumerable<IndexGroup> indexGroups)
  • public static Mesh ByPointsIndices(IEnumerable<Point> points, IEnumerable<int> indices)
  • public static Mesh ByVerticesAndIndices(IEnumerable<Point> vertices, IEnumerable<int> indices)
  • public static Mesh Cone(Point origin, double baseRadius = 1, double topRadius = 0, double height = 1, int divisions = 0, bool cap = true)
  • public static Mesh Cuboid(Point origin, double length = 1, double width = 1, double height = 1, int xDivisions = 0, int yDivisions = 0, int zDivisions = 0)
  • public static string ExportMeshes(string filename, IEnumerable<Mesh> meshes)
  • public static Mesh ExtrudePolyCurve(PolyCurve polycurve, double height, Vector direction, bool cap = false)
  • public static Mesh[] ImportFile(string fileName)
  • public static Mesh Plane(Point origin, double xWidth = 1, double yWidth = 1, int xDivisions = 0, int yDivisions = 0)
  • public static Mesh Sphere(Point origin, double radius = 1, int divisions = 0, bool icosphere = true)
  • public Mesh BooleanDifference(Mesh tool)
  • public Mesh BooleanIntersection(Mesh tool)
  • public Mesh BooleanUnion(Mesh tool)
  • public BoundingBox BoundingBox()
  • public Mesh CloseCracks()
  • public Line[] Edges()
  • public Mesh[] Explode()
  • public Mesh GenerateSupport(double baseHeight = 0.4, double baseDiameter = 8, double postDiameter = 3, double tipHeight = 1, double tipDiameter = 0.5)
  • public PolyCurve[] Intersect(Plane intersectionPlane)
  • public Mesh MakeHollow(int holeCount = 1, double holeRadius = 1.5, double wallThickness = 2, double solidResolution = 128, double meshResolution = 128)
  • public Mesh MakeWatertight()
  • public Mesh Mirror(Plane mirrorPlane)
  • public Point Nearest(Point point)
  • public Mesh PlaneCut(Plane plane, bool makeSolid = false)
  • public Point Project(Point point, Vector dir)
  • public Mesh Reduce(double triangleCount)
  • public Mesh Remesh()
  • public Mesh Repair()
  • public Mesh Rotate(Vector axis, double degrees = 0)
  • public Mesh Scale(double scaleFactor = 1)
  • public Mesh Scale(double x = 1, double y = 1, double z = 1)
  • public Mesh Smooth(double scale = 4)
  • public Mesh Translate(Vector vector)
  • public Mesh Translate(Vector vector, double distance = 0)
  • public Mesh Translate(double x = 0, double y = 0, double z = 0)
  • public Point[] TriangleCentroids()
  • public Vector[] TriangleNormals()
  • public Surface[] Triangles()
  • public List<int> VertexIndicesByTri()
• public class PanelSurface : DesignScriptEntity
• public enum PanelSurfaceBoundaryCondition
• public class PolySurface : Surface
  • public static PolySurface BySweep(Curve rail, Curve profile)
• public class Solid : Topology
  • public static Solid ByLoft(IEnumerable<Curve> crossSections, Curve guideCurve)
  • public Solid UnionAll(IEnumerable<Solid> solids)
• public class Surface : Topology
  • public static Surface ByLoft(IEnumerable<Curve> crossSections, Curve guideCurve)
  • public PolySurface Join(Surface otherSurface)
• public class Vector : DesignScriptEntity
  • public double AngleBetween(Vector otherVector)
  • public double AngleBetween(Vector otherVector, Vector rotationAxis)

Autodesk.DesignScript.Geometry.Core

• public class EntityTags
  • public EntityTags()

Autodesk.DesignScript.Geometry.TSpline

• public class TSplineSurface : TSplineTopology
  • public static TSplineSurface BuildPipes(IEnumerable<Curve> curves, double defaultRadius, double snappingTolerance, IEnumerable<int> segmentsCount, IEnumerable<double> endRotations, IEnumerable<double> endRadii, IEnumerable<double> endPercentage, bool inSmoothMode)
  • public TSplineSurface CreateMatch(IEnumerable<TSplineEdge> tsEdges, IEnumerable<Curve> curves, int continuity, bool useArclength, bool useRefinement, int numRefinementSteps, double refinementTolerance, bool usePropagation, double widthOfPropagation, double tangentScale, double curvParamWeight, bool flipSourceTargetAlignment)
  • public TSplineSurface CreateMatch(IEnumerable<TSplineEdge> tsEdges, IEnumerable<Edge> brepEdges, int continuity, bool useArclength, bool useRefinement, int numRefinementSteps, double refinementTolerance, bool usePropagation, double widthOfPropagation, double tangentScale, double curvParamWeight, bool flipSourceTargetAlignment)

DynamoUnits

• public class Area : SIUnit, IComparable, IEquatable<Area>
  • public const string SQUARE_CENTIMETERS = "cm²"
  • public const string SQUARE_FEET = "ft²"
  • public const string SQUARE_INCHES = "in²"
  • public const string SQUARE_METERS = "m²"
  • public const string SQUARE_MILLIMETERS = "mm²"
  • public static Dictionary<string, double> Conversions { get; }
  • public static double ToSquareCentimeters { get; }
  • public static double ToSquareFoot { get; }
  • public static double ToSquareInch { get; }
  • public static double ToSquareMillimeters { get; }
  • public AreaUnit AreaUnit { get; set; }
  • public double UiAreaConversion { get; }
  • public static Area FromDouble(double value)
  • public static Area FromDouble(double value, AreaUnit unit)
  • public static Area FromSquareFeet(double value)
  • public int CompareTo(object obj)
  • public bool Equals(Area other)
• public enum AreaUnit
  • SquareCentimeter = 3
  • SquareFoot = 1
  • SquareInch = 0
  • SquareMeter = 4
  • SquareMillimeter = 2
• public class BaseUnit
  • public static double Epsilon { get; }
  • public static string GeneralNumberFormat { get; set; }
  • public static AreaUnit HostApplicationInternalAreaUnit { get; set; }
  • public static LengthUnit HostApplicationInternalLengthUnit { get; set; }
  • public static VolumeUnit HostApplicationInternalVolumeUnit { get; set; }
  • public static string NumberFormat { get; set; }
  • public BaseUnit()
• public class Insolation : SIUnit, IComparable, IEquatable<Insolation>
  • public const string BTU_PER_SQUARE_FOOT = "BTU/ft²"
  • public const string KILLOWATT_HOURS_PER_SQUARE_METER = "kWh/m²"
  • public const string WATT_HOURS_PER_SQUARE_METER = "Wh/m²"
  • public static Dictionary<string, double> Conversions { get; }
  • public static double ToBTUFoot2 { get; }
  • public static double ToKwhMeter2 { get; }
  • public InsolationUnit InsolationUnit { get; set; }
  • public double UiInsolationConversion { get; }
  • public static Insolation FromDouble(double value)
  • public int CompareTo(object obj)
  • public bool Equals(Insolation other)
• public enum InsolationUnit
  • BTUPerFootSquared = 2
  • KilowattHoursPerMeterSquared = 1
  • WattHoursPerMeterSquared = 0
• public interface IUnitInput
  • double ConvertToHostUnits()
• public class Length : SIUnit, IComparable, IEquatable<Length>
  • public const string CENTIMETERS = "cm"
  • public const string FEET = "ft"
  • public const string INCHES = "in"
  • public const string METERS = "m"
  • public const string MILLIMETERS = "mm"
  • public static Dictionary<string, double> Conversions { get; }
  • public static double ToCentimeter { get; }
  • public static double ToFoot { get; }
  • public static double ToInch { get; }
  • public static double ToMeter { get; }
  • public static double ToMillimeter { get; }
  • public LengthUnit LengthUnit { get; set; }
  • public double UiLengthConversion { get; }
  • public static Length FromDouble(double value)
  • public static Length FromDouble(double value, LengthUnit unit)
  • public static Length FromFeet(double value)
  • public static Length FromFeet(double value, LengthUnit unit)
  • public int CompareTo(object obj)
  • public bool Equals(Length other)
• public enum LengthUnit
  • Centimeter = 5
  • DecimalFoot = 2
  • DecimalInch = 0
  • FractionalFoot = 3
  • FractionalInch = 1
  • Meter = 6
  • Millimeter = 4
• public class Location
  • public double Latitude { get; set; }
  • public double Longitude { get; set; }
  • public string Name { get; set; }
  • public static Location ByLatitudeAndLongitude(double latitude, double longitude, string name = null)
• public class MathematicalArgumentException : Exception
  • public MathematicalArgumentException()
  • public MathematicalArgumentException(string message)
• public class Quantity
  • public string Name { get; }
  • public string TypeId { get; }
  • public IEnumerable<Unit> Units { get; }
  • public static Quantity ByTypeID(string typeId)
  • public static bool op_Equality(Quantity lhs, Quantity rhs)
  • public static bool op_Inequality(Quantity lhs, Quantity rhs)
• public abstract class SIUnit : BaseUnit
  • public static Dictionary<string, double> Conversions { get; }
  • public abstract double UnitValue { get; }
  • public double Value { get; set; }
  • protected SIUnit(double value)
  • public static SIUnit op_Addition(SIUnit x, SIUnit y)
  • public static SIUnit op_Addition(SIUnit x, double y)
  • public static double op_Addition(double x, SIUnit y)
  • public static object op_Division(SIUnit x, SIUnit y)
  • public static SIUnit op_Division(SIUnit x, double y)
  • public static bool op_GreaterThan(double x, SIUnit y)
  • public static bool op_GreaterThan(SIUnit x, double y)
  • public static bool op_GreaterThan(SIUnit x, SIUnit y)
  • public static bool op_GreaterThanOrEqual(double x, SIUnit y)
  • public static bool op_GreaterThanOrEqual(SIUnit x, double y)
  • public static bool op_GreaterThanOrEqual(SIUnit x, SIUnit y)
  • public static bool op_LessThan(double x, SIUnit y)
  • public static bool op_LessThan(SIUnit x, double y)
  • public static bool op_LessThan(SIUnit x, SIUnit y)
  • public static bool op_LessThanOrEqual(double x, SIUnit y)
  • public static bool op_LessThanOrEqual(SIUnit x, double y)
  • public static bool op_LessThanOrEqual(SIUnit x, SIUnit y)
  • public static SIUnit op_Modulus(SIUnit x, SIUnit y)
  • public static SIUnit op_Modulus(SIUnit x, double y)
  • public static double op_Modulus(double x, SIUnit y)
  • public static SIUnit op_Multiply(SIUnit x, SIUnit y)
  • public static SIUnit op_Multiply(SIUnit x, double y)
  • public static SIUnit op_Multiply(double x, SIUnit y)
  • public static SIUnit op_Subtraction(SIUnit x, SIUnit y)
  • public static SIUnit op_Subtraction(SIUnit x, double y)
  • public static double op_Subtraction(double x, SIUnit y)
  • public static SIUnit ToSIUnit(object value)
  • public abstract SIUnit Add(SIUnit x)
  • public abstract SIUnit Add(double x)
  • public abstract SIUnit Ceiling()
  • public abstract double ConvertToHostUnits()
  • public abstract object Divide(SIUnit x)
  • public abstract SIUnit Divide(double x)
  • public abstract SIUnit Floor()
  • public abstract SIUnit Modulo(SIUnit x)
  • public abstract SIUnit Modulo(double x)
  • public abstract SIUnit Multiply(SIUnit x)
  • public abstract SIUnit Multiply(double x)
  • public abstract SIUnit Round()
  • public abstract void SetValueFromString(string value)
  • public abstract SIUnit Subtract(SIUnit x)
  • public abstract SIUnit Subtract(double x)
• public class Symbol
  • public bool Space { get; }
  • public string Text { get; }
  • public string TypeId { get; }
  • public Unit Unit { get; }
  • public static Symbol ByTypeID(string typeId)
  • public static bool op_Equality(Symbol lhs, Symbol rhs)
  • public static bool op_Inequality(Symbol lhs, Symbol rhs)
  • public static string StringifyDecimal(double value, int precision, Symbol symbol, bool removeTrailingZeros = false)
  • public static string StringifyFraction(double value, int precision, Symbol symbol)
  • public static IEnumerable<Symbol> SymbolsByUnit(Unit unit)
• public class Unit
  • public IEnumerable<Unit> ConvertibleUnits { get; }
  • public string Name { get; }
  • public IEnumerable<Quantity> QuantitiesContainingUnit { get; }
  • public string TypeId { get; }
  • public static bool AreUnitsConvertible(Unit fromUnit, Unit toUnit)
  • public static Unit ByTypeID(string typeId)
  • public static bool op_Equality(Unit lhs, Unit rhs)
  • public static bool op_Inequality(Unit lhs, Unit rhs)
• public static class UnitExtensions
  • public static bool AlmostEquals(this double double1, double double2, double precision)
  • public static Area ToArea(this double value)
  • public static Length ToLength(this double value)
  • public static Volume ToVolume(this double value)
• public class UnitsException : MathematicalArgumentException
  • public UnitsException(Type a, Type b)
• public static class Utilities
  • public static string SchemaDirectory { get; }
  • public static double ConvertByUnitIds(double value, string fromUnit, string toUnit)
  • public static double ConvertByUnits(double value, Unit fromUnit, Unit toUnit)
  • public static IEnumerable<Quantity> GetAllQuantities()
  • public static IEnumerable<Symbol> GetAllSymbols()
  • public static IEnumerable<Unit> GetAllUnits()
  • public static double ParseExpression(string expression)
  • public static double ParseExpressionByUnit(Unit targetUnit, string expression)
  • public static double ParseExpressionByUnitId(string targetUnit, string expression)
• public class Utils
  • public Utils()
  • public static string CreateFraction(double value, double precision)
  • public static double FromFeetAndFractionalInches(string value)
  • public static void ParseAreaFromString(string value, out double square_inch, out double square_foot, out double square_millimeter, out double square_centimeter, out double square_meter)
  • public static void ParseLengthFromString(string value, out double feet, out double inch, out double m, out double cm, out double mm, out double numerator, out double denominator)
  • public static bool ParseLengthInFeetFromString(string value, out double feet, out double numerator, out double denominator)
  • public static string ParsePartialInchesToString(double value, double precision)
  • public static double ParseUnit(string value, string unitSymbol)
  • public static void ParseVolumeFromString(string value, out double cubic_inch, out double cubic_foot, out double cubic_millimeter, out double cubic_centimeter, out double cubic_meter)
  • public static string ParseWholeInchesToString(double value)
  • public static string ToFeetAndDecimalInches(double decimalFeet)
  • public static string ToFeetAndFractionalInches(double decimalFeet)
  • public static string ToFractionalInches(double decimalInches)
• public class Volume : SIUnit, IComparable, IEquatable<Volume>
  • public const string CUBIC_CENTIMETERS = "cm³"
  • public const string CUBIC_FEET = "ft³"
  • public const string CUBIC_INCHES = "in³"
  • public const string CUBIC_METERS = "m³"
  • public const string CUBIC_MILLIMETERS = "mm³"
  • public static Dictionary<string, double> Conversions { get; }
  • public static double ToCubicCentimeter { get; }
  • public static double ToCubicFoot { get; }
  • public static double ToCubicInch { get; }
  • public static double ToCubicMillimeter { get; }
  • public double UiVolumeConversion { get; }
  • public VolumeUnit VolumeUnit { get; set; }
  • public static Volume FromCubicFeet(double value)
  • public static Volume FromDouble(double value)
  • public static Volume FromDouble(double value, VolumeUnit unit)
  • public int CompareTo(object obj)
  • public bool Equals(Volume other)
• public enum VolumeUnit
  • CubicCentimeter = 3
  • CubicFoot = 1
  • CubicInch = 0
  • CubicMeter = 4
  • CubicMillimeter = 2